Featured Items

Tempeff: The Dual Core Difference. Turning up the Heat on Energy Recovery!

Tempeff

Turning up the Heat on Energy Recovery!

Stinebaugh & Company represents Tempeff, with Dual Core™ Technology, offering the highest quality energy recovery equipment with the highest efficiency available.

 

 

The Dual Core Difference

Any building owner or operator knows that due to the extreme North American climate, conditioning ventilation air is very expensive. Ventilation air is extremely important to ensure the building is healthy and in turn the occupants are healthy and productive. Thanks to Tempeff Dual Core’s high efficiencies, owners can meet or exceed minimum legislated ventilation requirements, without the usual high operating costs of traditional ventilation heating and cooling equipment.

 

Up to 90% sensible efficiency

Other available technologies offer a maximum of 50-75% efficiency under ideal circumstances, and much lower real effectiveness in colder temperatures due to frost. Our Dual Core™ design is significantly more energy efficient in all conditions, without any requirement for a defrost strategy, thus true operating costs are extremely attractive.

Obtain up to 70% latent recovery

In winter modes condensation will form on the exhausting heat exchanger. When the cycle changes, the outdoor air is passed over the heat exchanger and that moisture is added back to the airstream. This reduces the need for added humidity in the conditioned space.

Resist frost while maintaining effectiveness

Most heat recovery technologies suffer from the same basic drawback. In cold temperatures, frost forms on the exhaust side of the heat exchanger. This dramatically reduces the heat recovery effectiveness and drives up true operating costs. With the Dual Core™ design frost will never build up in a typical application. By employing a cycling heat exchanger, frost doesn’t have a chance to form, and one heat exchanger is always delivering conditioned air to the space.

Lower the maintenance of your system

With few moving parts, maintenance of the system is very low. Due to the cycling nature of the heat exchangers dust rarely builds up on the heat exchangers, eliminating the need for frequent cleaning.

Long Term Performance

In a third party audit of a 17 year old installation, performed by CIT Energy Management AB, it was found that the efficiency of the equipment was the same as the day it was installed (90% measured temperature efficiency). Owners of Tempeff equipment can rest assured that the high efficiency achieved will not diminish over time.

 

Please call Maile Guieb, Zach Keller, or Doug Franklin for more information today!

 

Stinebaugh & Company has expanded its in-stock inventory to help you manage your seasonal needs!

Stinebaugh & Company has expanded its in-stock inventory to help you manage your seasonal needs!

New in-stock inventory includes:

  • DriSteem: everything from canisters to valves and descaling solution
  • Zehnder Rittling: baseboard and accessories
  • Suburban: HVAC parts for PTAC units
  • Other manufacturers and equipment, including Greenheck and Price

Please contact parts@stinebaugh.com for the following:

  • Get help sourcing the parts you need, from the manufacturers you trust
  • Request parts you would like us to keep in stock
  • Set up recurring shipments for standard HVAC maintenance, such as for filters or descaling solution

Daikin Core: The Future of Energy Recovery is Here: Latent Recovery, Less Maintenance, Minimal Crossover

  • Patented Polymer Membrane
    • All CORE exchangers are made with a patented polymer membrane that transfers both sensible and latent energy, while also blocking the transfer of gases and other contaminant.
  • Performance
    • Meets ASHRAE 90.1with 50% to 60% total effectiveness across operating range.
  • 50% Lower Pressure Drop on Supply Air Side
    • Lower specific fan power and energy consumption.
  • Cold Climate Advantage
    • Operate at lower temperatures before requiring defrost.
  • Very Low Gas Cross-over
    • Polymer membrane tested with a variety of gases, odors and VOCs to have 0.5% crossover
  • Healthy CORE
    • Exchangers are water washable with polymer membrane that passes ISO hygiene testing.
  • Now available in both Rebel & Vision systems

FOR MORE INFORMATION CONTACT MAILE GUIEB TODAY!!!!!

Climate By Design International (CDI): Why Use Desiccant Technology?

Desiccant Dehumidification

Uncontrolled humidity does not need to be a problem. By providing dry desiccant air supply you can control threats to safety, product and costs. Dry air is a solution to corrosion, bacterial, mold, and mildew growth. You can have independent control of moisture levels and temperatures. Now you can be as dry as you want at whatever temperature you want.

Desiccant Dehumidification is a continuous process. A desiccant wheel rotates through two separate airstreams.

The solid desiccant rotor adsorbs moisture from process air [1]. The moisture is taken out of the rotor by a second and separate reactivating airstream [2]. This process enables the rotor to continually take moisture out of the airstream without interruption.

 

 

 

 

 

 

Benefits of using Desiccant Technology:

  1. Very dry air can be achieved.
  2. Better thermodynamic efficiency: Achieved because no change of phase (condensation) is necessary.
  3. Simple Construction: Basic dehumidifier includes only two fans, a heater and the desiccant rotor assembly.
  4. Simple maintenance: Simply replace filters regularly and performance is assured.
  5. Better construction: Double-wall insulated casing suitable for indoor or outdoor mounting.
  6. Modern controls: We include standard intelligent microprocessor controllers with “Fail Capable”mode and full building integration capable of using BACnetTM, Modbus®, or LonWorks®

For additional information about the CDI product line please contact Doug Franklin today!

See Q Duct Installation Process at DMVA Mandregan Building, JBER, Alaska

Click on this link for an overview of the installation process:

Q DUCT Installation Process at DMVA Mangregan, JBER, AK

Q Duct™ Outdoor Preinsulated Duct System is constructed to withstand harsh weather conditions in all climates. Click here to learn more!

Outdoor Duct Made Easy.

Withstands Harsh Weather Conditions.

Engineered for exterior use, Q Duct™ Outdoor Preinsulated Duct System is constructed to withstand harsh weather conditions in all climates. Q Duct is custom fabricated using two layers of rigid UL 181 Pal phenolic core material, faced on both sides with coated aluminum and an exterior multilayered laminate jacketing material. Requiring no additional insulation or weatherproofing, Q Duct sections are delivered pre-assembled to the jobsite ready for installation by a certified contractor. The product’s unique design easily installs in a fraction of the time of traditional insulated sheet metal duct, saving money and labor.

Q Duct Features
• Interlocking design with a quadruple seal
• Meets UL 181
• Meets ASTM E84 flame and smoke requirements, 25/50
• Self-insulated—no need for insulation subcontractors
• Air-and water-tight design
• Interior and exterior layers resist mold, mildew, UV and extreme weather conditions
• Contains no microfibers, CFC or HCFC
• Thermal break design with no through metal
• Industry-leading 10 year warranty

Q Duct Benefits
• Saves energy, space and labor
• Improved indoor air quality (IAQ)
• Significantly lowers air and water leakage compared to exterior insulated sheet metal systems
• Durable, yet lightweight
• Fast and easy installation
• Significant installed cost-savings over traditional exterior duct systems
• Installed by certified contractors
• Virtually maintenance free
• Can contribute toward LEED® points

Want More Information? Contact John Post at jpost@stinebaugh.com today!!

Price offers the most complete line of noise control products in the industry.

Price offers the most complete line of noise control products in the industry for both interior and exterior applications.

Please contact John Post for more information.

Interior Applications:

Exterior Applications:

Greenheck FumeJet® Exhaust Fan Video

Greenheck’s fume exhaust systems are designed to safely handle fumes and odors in commercial, industrial and life safety laboratory applications. All systems are pre-engineered to meet application guidelines provided by ANSI, NFPA, and ASHRAE.

Features include guy wire free discharge stacks to prevent exhaust re-entrainment, spark resistant construction, corrosive resistance coatings, and AMCA Licensed performance data. They can additionally be configured for specialized applications such as high temperature exhaust, grease exhaust, and multi-fan packs forredundancy on critical ventilation applications.

This new video details the various components of the FumeJet’s fan and stack assembly with inlet and outlet performance corrections for quick and trouble freeinstallation, complimentary accessories, and configurable mounting options to suit different building layouts.

Please contact George Hearin for more information today!

 

XeteX Innovative Heating, Ventilating & Air Conditioning Solutions

XHR, XHS

Xetex offers custom packaged, roof or indoor mounted, air-to-air heat recovery ventilator designed with an upright aluminum flat plate exchanger and a full array of options & airflow configurations. Ideal for wide range of commercial applications including large office buildings, hotels, factories, water treatment plants, etc. Service access is provided on a single side.

  • The XHR is designed with the airflows traveling in opposing directions, ideal for indoor mounting and adaptable for outdoor mounting with a draw-through blower on each end.
  • The XHS is designed with the airflows traveling in the same direction, exiting on one end of the unit, ideal for outdoor mounting and adaptable for indoor mounting with draw-through blowers on a single end.

Call Doug Franklin for more information today!

 

Alfa Laval is a leading global supplier for heat exchangers. See more here!

Alfa Laval is committed to saving energy and protecting the environment. The company is known for focusing on innovation and new ways of thinking. Alfa Laval makes continuous and consistent investments designed to build, strengthen and develop the company’s global market leadership.

Alfa Laval’s mission is to optimize the performance of customers’ processes. This means that they are a customer-focused company that supplies products and solutions that help customers become more productive and competitive.

How can Alpha Laval help you optimize your process?

Please contact Doug Franklin for additional information.